|
INSTALLATION
INSTRUCTIONS:
STEP 1:
Kit
contains:
(1) Aluminum
Strut Tower Brace
(4) Stainless
Steel Washers
(1) Instruction
Sheet
STEP 2:
Remove inboard strut tower nuts; 4 total, 2 per side.
STEP 3:
Determine correct brace orientation; the passenger side is
marked with a P on the underside of the end bracket.
STEP 4:
Install strut tower brace over existing studs.
STEP 5:
Install washers; 4 total, 1 per stud.
STEP 6:
Reinstall
strut tower nuts.
STEP 7:
Torque strut tower nuts to 25 lb●ft; 4 total, 2 per side.
STEP 8:
Check clearances to hood and engine.
|
